Tel: +86-13771063101

E-mail: zakiliu6688@aliyun.com

Home > News > Content
The Application Of Different Sticky PE Protection Film!
- May 28, 2018 -

According to the viscosity, the membrane of crown and Rong protection is mainly: ultra low viscosity protection film, low viscosity protective film, medium and low viscosity protective film, medium stick protection film, high viscosity protective film and super high viscosity protective film.

1. ultra low viscosity protection film (that is, micro bottom sticky): characteristics: thick (more than 0.03m + 0.003), wide (less than 1.3), high (100-1500), substrate (PE), peel strength (less than 5g/cm), temperature resistance (60), tensile rate (>400)

Usage: easy to use, easy to stick, easy to tear, no residual glue, suitable for organic board, instrument, display, glass lens, plastic lens and so on.

2. low viscosity protective film characteristics: thick (> 0.03m + 0.003), wide (less than 1.3), high (100-1000), base material (PE), peel strength (10-20g/cm), temperature resistance (60), tensile rate (>400)

Purpose: adhesion stability, good adhesion, good peeling performance, no residual glue phenomenon, suitable for steel mirror plate, titanium metal, smooth plastic plate, silk screen, Ming brand, etc.

3. medium low viscosity protective film characteristics: thick (> 0.03m + 0.003), wide (less than 1.3), high (100-1000), base material (PE), peel strength (30-50g/cm), temperature resistance (60), tensile rate (>400)

Purpose: adhesion stability, good adhesion, good peeling performance, no residual glue, suitable for furniture Baoli plate, stainless steel plate, tile, marble, artificial stone and so on.

4. medium viscosity protective film characteristics: thick (> 0.05 + 0.003), wide (less than 1.3), high (100-1000), base material (PE), peel strength (60-80g/cm), temperature resistance (60), tensile rate (>400)

Purpose: adhesion stability, good adhesion, good peeling performance and no residual glue. It is suitable for surface protection of fine grained sand and general refractory materials.

5. high viscosity protective film characteristics: thick (> 0.05 + 0.003), wide (less than 1.3), high (100-800), base material (PE), peel strength (80-100g/cm), temperature resistance (60), tensile rate (>400)

Purpose: adhesion stability, good adhesion, good peeling performance, no residual glue phenomenon, suitable for fine grain grit, aluminum plastic plate, hard sticky plastic plate and so on.

6. super high viscosity protective film

Characteristics: thick (> 0.04 + 0.003), wide (less than 1.3), high (100-800), base material (PE), peel strength (40-60g/cm), temperature resistance (60), tensile rate (>400).

Purpose: high viscosity, water soluble acrylic acid as pressure sensitive adhesive, easy to use, easy to stick, easy to tear, no residual glue. It is suitable for rough coated aluminum and other difficult sticky materials.